What’s the difference between a full refinish and a screen & recoat?
A full refinish sands the old finish (and a thin layer of wood) so the floor can be stained and given a new finish. Every screen and recoat starts with a deep clean. Then the existing finish is scuffed and a new coat is applied, without going down to bare wood. A recoat is a maintenance step for a finish that’s still intact. If the finish is worn through, the color needs to change, or there is deeper damage, a full refinish is usually the better path.
How do I know if my floors can be refinished?
Most solid hardwood floors can be refinished. Some engineered floors can be refinished too, but only if enough wear-layer remains — that has to be checked on site. Age, species, existing thickness, and previous sandings all matter. If you’re unsure, request an estimate and we’ll take a look.
How long does a typical refinish take?
We don’t publish a one-size schedule here because the size of the house, repairs, and the finish you choose all change the calendar.
Do I need to move out during the work?
Furniture has to come off the floors so the work can be done evenly. Whether you stay in the house overnight depends on the finish, ventilation, pets, and your comfort.
How do you control sanding dust?
Every sanding machine runs on a HEPA vacuum system to keep airborne dust as low as possible. We prepare the space and clean as we go.
What’s the difference between a penetrating oil and a surface finish?
A penetrating oil soaks into the wood and is maintained over time by cleaning and refreshing the oil. A traditional finish (a film-forming finish, including many waterborne and oil-modified systems) builds a protective layer on the surface. We’ll help you choose the option that fits the look you want and how the room is used.
How do I care for the floor after that?
Use walk-off mats at exterior doors and felt pads under furniture. Vacuum or dry mop often. When you need a wet clean, use a periodic pH-neutral wood-floor cleaner — not a steam mop, and not a harsh all-purpose cleaner.
Can you repair or replace damaged boards?
Yes. Repairs and board replacement are part of the work, where needed. When possible, we recommend refinishing the whole area for the most consistent result.
What is a deep cleaning, and when is it the right choice?
If the finish is still intact but the floor looks dull or dirty, a professional deep cleaning may be enough. We use a power scrubbing machine to efficiently extract any buildup and potential contaminants. A deep clean does not automatically include a recoat; every screen and recoat, though, starts with a deep clean. If the finish is worn through, or you want to change color, you’ll likely need a full refinish.
Do you install new hardwood?
Yes. We install new hardwood floors in and around Sioux Falls, SD — prefinished or site-finished. We can stain and finish a site-finished floor after it’s installed. We source and supply the wood, then handle everything from subfloor prep to the final coat.
What area do you serve?
In and around Sioux Falls, SD. Including Brandon, Harrisburg, Tea, Dell Rapids, Yankton, Mitchell, Madison, Luverne, MN, Pipestone, MN. Willing to travel.
How do I request an estimate?
Use the form on the Contact page (or on the Home page). You’ll receive a short intake form to get the details started. You can also call (507) 227-7436 or email contact@midwesthardwoodsolutions.com. There is no published price list; an estimate follows the intake and, when needed, a look at the floor.